LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 542 (Glass & Window Regulators (Sedan)) >> 64 Glass, Window Regulators >> Rear Window >> Overview - Rear Window >> Overview - Rear Window, Avant

Overview - Rear Window, Avant

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Window Overview
GWWA64-10287Courtesy of AUDI OF AMERICA, LLC
  1. Rear Window
  2. Adhesive Bead
    NOTE:

    Different distances to window edge.

    • Dimension -a- = 11 mm.
    • Dimension -b- = 38.5 mm.
    • Dimension -c- = 12.5 mm.
    • Dimension -d- = 3 mm.
  3. High-Mounted Brake Lamp
    • Must not be removed when the rear window is removed.
  4. Adhesive Stop Profile
    • Must be adhered before window adhesive, near rear window heater distributing wire.
    • Place inner edge of adhesive stop profile to outer edge of distributing wire for rear window heater and press on.
    • Window adhesive must not come into contact with rear window defroster distributing wire.
  5. Spacer
    • Adhered 3 times on upper and lower window edge.
scientia non olet · About LEMON Manuals