LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 542 (Glass & Window Regulators (Sedan)) >> 64 Glass, Window Regulators >> Door Windows >> Front Door Window, Removing And Installing

Front Door Window, Removing And Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Door Window
GWWA57-10132Courtesy of AUDI OF AMERICA, LLC
  1. Door Window
  2. Window Regulator
    • The window regulator remains installed inside the door.

Releasing the Door Window

-- Lower the door window.

-- Using a screwdriver, press coupling plate -3- outward to release through cut-out in window guide -1- and hole in door window -2-.

-- Remove window upward from coupling plate.

-- Tilt the window forward and pull it straight upward and out of the window guide.

Fig 2: Door Window, Releasing
GWWA57-10138Courtesy of AUDI OF AMERICA, LLC

Door Window, Inserting

-- Insert door window -1- diagonally toward front in door window guide.

-- Align window in front and rear window guides and slide it down.

-- Press window down into coupling plate.

-- This engages coupling plate in window.

Fig 3: Door Window, Inserting
GWWA57-10137Courtesy of AUDI OF AMERICA, LLC