Right Flange Shaft, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Bearing/Bushing Installer - Multiple Use VW295
- Puller - Flanged Shaft T10037
- Sealing Grease G 052 128 A1
NOTE:
The right flange shaft can also be removed and installed with the transmission installed. Refer to RIGHT SEAL, REPLACING .