LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 538 (Final Drive & Differential - Manual Transmission Internal Components 0B2 (Sedan)) >> 39 Final Drive, Differential >> Center Differential >> Transmission Output Shaft Seal, Replacing >> Transmission Output Shaft Seal, Replacing, Transmission Output Shaft And Splines With Vibration Damper

Transmission Output Shaft Seal, Replacing, Transmission Output Shaft And Splines With Vibration Damper

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

The transmission output shaft with splines on vehicles with a vibration damper must be removed in order to replace the transmission output shaft seal with splines.

Refer to TRANSMISSION OUTPUT SHAFT WITH SPLINES, SEAL AND BALL BEARING, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals