Rear Final Drive 0BE - Replacing, Flange/Driveshaft Shaft Seal: Notes
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Press Piece - Multiple Use VW431
- Puller - Unit Injector T10055
- Puller - Unit Injector - Adapter 2 T10055/2
- Seal Installer - Hollow Shaft T10380
- Seal Installer - Propshaft T40247
- Seal Installer - Propshaft - Guide Sleeve T40247/1
- -1- Puller - Kukko 2-Arm - 70-180mm 20/10
- Inductive Heater VAS6414
- or
- Commercially Available Hot Plate
- and
- Digital Thermometer VAS6519
- Drip Tray
- Sealing Grease G 052 128 A1