Driveshaft, Removing And Installing From Rear Final Drive: Notes
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Counterhold - Kit - Multiple Use T10172
- Counterhold - Kit - Adapter 5 T10172/5 (M8 Bolts)
- Counterhold - Kit - Adapter 6 T10172/6 (M10 Bolts)
- High Temperature Grease G 000 633
- Pay attention to the notes. Refer to OVERVIEW - DRIVESHAFT BOLTED ON TRANSMISSION SIDE, AUDI A4 AND A5 .
- A two-column shop hoist should be used when working on the driveshaft.