Left Flange Shaft, Removing And Installing: Removing

WARNING: This page is about a different car, the 2010 Audi A4 and 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Bolts & Flange Shaft Mounting Bracket

Courtesy of AUDI OF AMERICA, LLC

Secure the transmission on the Engine And Transmission Holder VAS6095. Refer to SECURING ON ENGINE AND TRANSMISSION HOLDER .

-- Tilt the transmission back on the engine/transmission holder so the transmission fluid does not drain out.

-- Remove the bolts -arrows- from the flange shaft mounting bracket.

-- Remove the left flange shaft -2- from the transmission -arrow A-.

Fig 2: Identifying Left Flange Shaft

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Ignore -1- and -arrow 3, B-.

-- Remove the torque converter. Refer to TORQUE CONVERTER, REMOVING AND INSTALLING .