Left Seal, Replacing, 0BC: Removing
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
-- Follow all general repair information. Refer to REPAIR INFORMATION .
-- Remove the rear final drive. Refer to FINAL DRIVE, REMOVING AND INSTALLING .
Remove the Right Flange Shaft
-- Attach the Puller - Flanged Shaft T10037 to the housing -arrow- and remove the flange shaft.
Left Flange Shaft, Removing
-- Attach the Puller - Flanged Shaft T10037 to the housing -arrow- and remove the flange shaft.
-- Use a suitable tool to pry out the seal.