Input Shaft Seal, Replacing, 0BC: Notes
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Puller - Multiple Use VW391
- Slide Hammer Set - Adapter 40 VW771/40 from the Slide Hammer Set VW771
- Retainer - Drive Flange 3028
- Puller - Unit Injector T10055
- -2- Puller - Unit Injector - Adapter 2 T10055/2
- Seal Installer - Driveshaft Flange T40109
- Seal Installer - Input Shaft - Guide Sleeve T40222/1
- Sealing Grease G 052 128 A1
- Two M 8 x 30 Bolts
- One M 8 x 45 bolt