Overview - Final Drive 0BF, AUDI A4, A5, A6, And A7

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Overview Of Final Drive (0BF, A4, A5, A6, And A7)

Courtesy of AUDI OF AMERICA, LLC

Subframe
- Removing and installing. Refer to OVERVIEW - SUBFRAME .
Bolt
- 95 Nm
Bolt
- 55 Nm
Left Driveshaft
- Removing and installing. Refer to DRIVE AXLE, REMOVING AND INSTALLING .
Bolt
- 20 Nm
Heat Shield
Rear Final Drive
- Removing and installing. Refer to FINAL DRIVE, REMOVING AND INSTALLING
- Additional work after replacing the rear final drive. Refer to ADDITIONAL WORK AFTER REPLACING REAR FINAL DRIVE 0BE, 0BF .
Driveshaft
- Overview. Refer to OVERVIEW - DRIVESHAFT .
- Removing and installing. Refer to DRIVESHAFT, REMOVING AND INSTALLING .
Right Driveshaft
- Removing and installing. Refer to DRIVE AXLE, REMOVING AND INSTALLING .