Rear Final Drive Identification

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

The rear final drive 0BD is allocated to the following transmissions:

6-speed manual transmission 0B2 AWD
6-speed manual transmission 0B4 AWD
7-speed S-tronic transmission 0B5 AWD
Automatic transmission 0B6 AWD
8-speed automatic transmission 0BK AWD

Rear Final Drive Allocation

Refer to ENGINE CODES TRANSMISSION ALLOCATIONS, RATIOS AND CAPACITIES .

Classification on the Rear Final Drive

Final drive 0BD, code letters and date of manufacture -arrow-

Fig 1: Final Drive 0BD Code Letters And Manufacture Date

Courtesy of AUDI OF AMERICA, LLC

-Arrow A- Final Drive 0BD with the part number (example: 0BD 500 043A)

Fig 2: Final Drive 0BD Including Part Number

Courtesy of AUDI OF AMERICA, LLC

-Arrow B- code letters JTN

-Arrow C- rear final drive date of manufacture

Example:	F	292	3242
	I	I	I
	Year of manufacture -2006- F = 2006, G = 2007, H = 2008...	Day of manufacture -292. calendar day- (always three digits)	Serial number of the day of production

The other data is not needed.

NOTE:

When replacing a rear final drive, always pay close attention to the rear final drive code, the PR number and the engine code. This is the only way to make sure the allocation is correct.