LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 529 (Fuel Supply - Engine Code(S): CAEB, CAED, CALA, CCBA, CGXC, CPMA, CPMB & CTUB (Sedan)) >> 20 Fuel Supply >> EVAP System >> Leak Detection Pump, Removing And Installing >> Removing

Leak Detection Pump, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the Evaporative Emission (EVAP) canister. Refer to EVAP CANISTER, REMOVING AND INSTALLING .

-- Free up the electrical connector -2-.

-- Remove the bolts -3-.

-- Unclip the diagnosis pump -1- from the bracket on the EVAP canister.

Fig 1: Identifying EVAP Canister Bolts And Electrical Connector -2-
GWWA20-10452Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals