LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 527 (Charging System & Cruise Control System (Starter, Generator & Cruise Control) (Sedan)) >> 27 Starter, Generator And Cruise Control >> Generator >> Ribbed Belt Pulley Without Freewheel, Removing And Installing >> Installing

Ribbed Belt Pulley Without Freewheel, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Turn the generator shaft counterclockwise to tighten.

-- Clip protective cap onto generator pulley.

Tightening specification

Component Nm
Ribbed belt pulley to generator 65
scientia non olet · About LEMON Manuals