Battery Load Test Results

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

By placing the battery under a strong load during the Battery -A- load test, the battery voltage will be reduced.

If the Battery -A- is good, the voltage drops only to the specified minimum voltage.
If the Battery -A- is defective or weakly charged, the battery voltage will drop very quickly to below the specified minimum voltage.
After testing, this low voltage level is maintained for a lengthy period and only increases again slowly.
Only perform the test once. Repeating the test will not produce accurate results.
In order to be able to test another/additional Battery -A-, the Battery Tester with Printer VAS5097A must cool down for approximately 30 minutes for the test result to be correct.