LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 523 (Final Drive & Differential - Manual Transmission Internal Components 0B4 (Sedan)) >> 39 Final Drive, Differential >> Seals >> Right Seal, Replacing >> Removing

Right Seal, Replacing: Removing

WARNING: This page is about a different car, the 2013 Audi S4, 2012 Audi S4, 2011 Audi S4, and 2010 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Right Flange Shaft By Fastening T10037
GWWA39-10255Courtesy of AUDI OF AMERICA, LLC

-- Remove right flange shaft by fastening Puller - Flanged Shaft T10037 to transmission housing -arrow-.

-- Pry out flange shaft seal using a lever.

Fig 2: Prying Out Flange Shaft Sealing Ring
GWWA39-10259Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals