LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 522 (3.2L - Crankshaft & Cylinder Block - Engine Code: CALA (Sedan)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Drive Plate, Removing And Installing >> Removing

Drive Plate, Removing And Installing: Removing

WARNING: This page is about a different car, the 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locking Flywheel Using Counterhold - Flywheel 10-201 Tool
GWWA13-10517Courtesy of AUDI OF AMERICA, LLC

-- Insert the Counterhold - Flywheel 10-201 to loosen the bolts.

CAUTION:

The outer surface of the bearing flange at the drive plate could be damaged.

  • Use a multipoint socket wrench with a shaft at least 40 mm long to loosen and tighten the drive plate bolts.

-- Remove the bolts, drive plate and sensor wheel.

scientia non olet · About LEMON Manuals