Ribbed Belt, Removing And Installing: Removing

WARNING: This page is about a different car, the 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Noise Insulation Panels

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front noise insulation -1-. Refer to OVERVIEW - NOISE INSULATION .

Fig 2: Identifying Pivoting Tensioning Device To Relieve Tension On Ribbed Belt

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of damage due to reversed running direction on a used ribbed belt.

Before removing ribbed belt, marking running direction with chalk or felt-tip pen for reinstallation later.

-- Pivot the tensioner clockwise -arrow- to release the tension on the ribbed belt.

-- Remove ribbed belt and release tensioning device.