Pistons, Checking

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, and 2013 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Measure approximately 15 mm from the lower edge at a 90° angle to the piston pin axis using a 75 to 100 mm external micrometer.

Deviation from specified size: maximum 0.04 mm

Courtesy of

Piston Diameter

Standard dimension

82.42⁽¹⁾

⁽¹⁾	Measurement without coating (thickness = 0.02 mm). The coating wears off.