Transmission, Transporting
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2018 Audi S6, 2017 Audi S6, 2016 Audi S6, 2016 Audi S4, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Shop Crane VAS6100
- Hook And Support Tool T40197
- Hook and Support Tool T40294
CAUTION:
Do not use the Hook And Support Tool T40197 for the repair (Refer to Sensor Module --, WITH INTEGRATED TRANSMITTERS AND SENSORS -G612-, -G632-, -G676 - AND Circuit Board 3 --, REMOVING AND INSTALLING ) - There is a risk of injury.
Only use the Hook and Support Tool T40294 for this operation.
Procedure
- The transmission is removed.
CAUTION:
Transmission components could be damaged if they are not set down correctly.
- Do not set the transmission on the ATF pan.
-- Engage the Hook And Support Tool T40197 in the holes on the right side of the transmission and secure it to the left side of the transmission with the knurled bolt -arrow-.
-- Lift and transport the transmission with the Shop Crane VAS6100.