Overview - Gearshift Knob And Cover
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2016 Audi S4, 2015 Audi S4, 2014 Audi S4, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Gearshift Knob
- With shift lever boot
- Removing and installing. Refer to GEARSHIFT KNOB, REMOVING AND INSTALLING .
- Clamp
- Secures the shift lever knob to the shift lever
- Secure using Hose Clip Pliers VAG1275A
- Boot (See Fig 1)
- Available only together with the support ring, refer to -item 4- Support Ring.
- Remove and install together with the noise insulation, refer to -item 5- Noise Insulation, and NOISE INSULATION, REMOVING AND INSTALLING .
- Support Ring (See Fig 1)
- Available only together with the boot, refer to -item 3- Boot.
- Noise Insulation (See Fig 1)
- Removing and installing. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
- Seal
- Nut
- 8 Nm
- Base Plate
- For the shift lever support
- Shift Lever with Shift Lever Support