Noise Insulation, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2016 Audi S4, 2015 Audi S4, 2014 Audi S4, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition.

-- Remove the shift lever knob with the shift lever boot. Refer to GEARSHIFT KNOB, REMOVING AND INSTALLING .

Fig 1: Identifying A/C Display Control Head, Shift Lever Boot And Bezel

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Multimedia System Control Head -E380-. Refer to Multimedia System Control Head -E380-, REMOVING AND INSTALLING .

-- Release the tabs -1- in direction of -arrow-. Raise the rear noise insulation when doing this.

Fig 2: Identifying Noise Insulation Over Shift Mechanism

Courtesy of AUDI OF AMERICA, LLC

-- Pull the noise insulation off the tabs -3-.

-- Pull the boot -2- off the gearshift lever in direction of -arrow-.