Selector Shaft, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Using Selector Shaft Guide Pin T40216

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Selector Shaft Guide Pins T40216 on the gearshift shaft.

-- Remove the bolts -1- and pry the selector shaft cover -2- off carefully.

Fig 2: Bring Selector Shaft Cover -2- Into Contact With Transmission Cover

Courtesy of AUDI OF AMERICA, LLC

-- Lift the gearshift shaft -arrow A- and remove it -arrow B-.

Fig 3: Lift Gearshift Shaft And Remove It

Courtesy of AUDI OF AMERICA, LLC