LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 515 (Controls & Housing - S TRONIC Transmission 0B5 (Sedan)) >> 34 Controls, Housing >> SUBFRAME Mount >> Transmission Support With Transmission Mount, Removing And Installing >> Removing

Transmission Support With Transmission Mount, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 Audi S6, 2017 Audi S6, 2016 Audi S6, 2016 Audi S4, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Transmission Support With Transmission Mount
GWWA37-10865Courtesy of AUDI OF AMERICA, LLC

-- Remove the tunnel crossmember. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and the transmission support with the transmission mount from the transmission.

scientia non olet · About LEMON Manuals