LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 513 (Refrigerant R134A Servicing (1 Of 2) (Sedan)) >> 87 Air Conditioning >> Refrigerant Circuit General Information >> Refrigerant Circuit Components Allocation, High And Low Pressure Sides >> O-Ring Seals

O-Ring Seals

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

These rings seal off the connection points between individual components of the refrigerant circuit.

Fig 1: Checking O-Ring Seal Diameters
GWWA87-0021Courtesy of AUDI OF AMERICA, LLC

Only O-rings that are resistant to refrigerant R134a and refrigerant oil must be installed. Make sure they are original replacement parts.

O-ring seals:

-- Always use only once.

-- Make sure diameters -a- and -b- are correct.

-- Coat with refrigerant oil before installing. Refer to OVERVIEW - REFRIGERANT CIRCUIT (vehicle-specific repair information) .

NOTE:

The color coding of refrigerant circuit O-rings with R134a has been discontinued. Black and colored O-rings are used. Refer to OVERVIEW - REFRIGERANT CIRCUIT (vehicle-specific repair information).