LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 512 (Exterior Body Panels (Hood, Lids) (Sedan)) >> (55 Hood, Lids) >> Hood >> Overview - Release Cable >> Routing the Release Cable Inside the Engine Compartment

Routing the Release Cable Inside the Engine Compartment

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Release Cable Routing In Engine Compartment
GWWA55-10315Courtesy of AUDI OF AMERICA, LLC

-- Route the release cable -2- as shown in the illustration in the engine compartment along the fender -3-, beginning from the vehicle interior and working out.

-- Slide the coupling -4- onto the lock carrier. Refer to "Cable Coupling" (See Figure).