Overview - Rear Lid Latch

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Overview Of Rear Lid Latch

Courtesy of AUDI OF AMERICA, LLC

Lid Latch
- Loosen the upper bumper cover and push it aside.
- Disconnect the lid lock cable at the coupling.
- Disconnect the connector.
- Loosen the bolts -3- and remove the latch forward from the lock carrier.
  NOTE:
  To adjust the hood height, move the lid lock up or down as required.
Lock Carrier
Bolt
- 11 Nm
Clip
- Slide the clamp with the electrical wire onto the tab on the lock carrier.
Lid Lock Wire
Tab