LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 512 (Exterior Body Panels (Hood, Lids) (Sedan)) >> (55 Hood, Lids) >> Hood >> Overview - Gas-Filled Strut

Overview - Gas-Filled Strut

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Gas-Filled Strut
GWWA55-10308Courtesy of AUDI OF AMERICA, LLC
  1. Gas-Filled Strut
    • To remove securing spring -arrow-, raise slightly and remove gas-filled strut from ball stud.
      NOTE:

      Ensure correct positioning during installation: the gas-filled strut tube must be attached on the body-side.

  2. Hood
  3. Ball Pin
    • 21 Nm
scientia non olet · About LEMON Manuals