Release Lever Cover, Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- >>A-Pillar<< Lower Trim
- Hood Release Lever Cover
- First disengage the cable from the coupling inside the engine compartment. Refer to Cable Coupling
- Pry the clip out of the hood release lever.
- Remove the cover sideways from the operating lever.
- Operating Lever
- Clip
- Press in completely, it must engage.