Hinges, Removing And Installing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Gas-Filled Strut
- Install the gas-filled strut tube on the hood side.
- Removing. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
- Hood
- Nut
- 21 Nm
- Hood Hinge
-- Before removing a hinge, support the lid or secure it against falling.
-- Remove the gas-filled strut. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
- Remove the bolts -4- and nuts -5-.
- Install in reverse order of removal.
- Nut
- 21 Nm