Gas-Filled Strut, Releasing Gas

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Clamp gas-filled strut in a vise in area -x- = 50 mm.

Fig 1: Gas-Filled Strut, Venting

Courtesy of AUDI OF AMERICA, LLC

WARNING:

Clamp only within this area, otherwise accident could occur!
Wear protective eyewear when sawing.

NOTE:

Cover area of sawn portion with a rag to absorb oil spraying out.

-- Cut through the gas-filled strut cylinder within the first third of the overall cylinder length using the piston rod end of the cylinder as a reference point.