Installed Calibration Tool VAS6350 Overview
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Calibration Tool - Wheel Center Mountings VAS6350/1
- Calibration Tool - Wheel Center Mountings VAS6350/1
- Right Angle Bracket
- Calibration Tool - Spacing Laser VAS6350/2 mount
- Plastic Foot
- Three on underside of calibration platform
- Adjustable for aligning horizontal position of calibration platform
- Calibration Tool - Linear Laser VAS6350/3
- On the calibration board
- Switching on and off, refer to Operating Instructions.
- Calibration Tool - Spacing Laser VAS6350/2
- Notes on operation, refer to Operating Instructions.
- Level on Calibration Platform
- On the calibration board
- for checking the horizontal position
- Left Angle Bracket
- Calibration Tool - Spacing Laser VAS6350/2 mount
- Calibration Board
- Between the mounts on the calibration board and the Calibration Tool - Wheel Center Mountings VAS6350/1 -dimension A- 1.47 m to 1.90 m