MULTIFUNCTION Buttons, Removing And Installing, Through My 2012: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the driver airbag, refer to Driver Side Airbag .

-- Disconnect trim ring from steering wheel.

-- Disconnect and remove the connector -1- from the button -2-.

Fig 1: Identifying Harness Connector And Slide Button

Courtesy of AUDI OF AMERICA, LLC

-- Slide multi-function button -2- out of steering wheel in direction of -arrow-.

-- Rotate multi-function button.

-- Release and disconnect the connector -2- for the tiptronic switch from the multifunction button -1- and then remove it.

Fig 2: Identifying Harness Connector And Tiptronic Switch At Multi-Function Button

Courtesy of AUDI OF AMERICA, LLC