MULTIFUNCTION 4-Spoke Steering Wheel, Removing And Installing, From My 2013: Notes

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Trim Removal Wedge 3409

The multifunction buttons -2- are attached to the trim -1-. The trim -1- and the multifunction buttons -2- are attached to the steering wheel. The multifunction buttons -2- have an extra retainer -3-.

Fig 1: Identifying Multifunction Buttons Are Attached To Trim

Courtesy of AUDI OF AMERICA, LLC

While removing, first make sure the trim -1- can be loosened by hand (approximately 5 mm). Then, using the Trim Removal Wedge 3409, open the retainers -3- on the multifunction buttons -2- and remove the trim -1- together with the multifunction buttons -2-.

Fig 2: Identifying Trim Retainers

Courtesy of AUDI OF AMERICA, LLC

Trim Molding

Arrows - tabs

Fig 3: Identifying Multifunction Button Retainers

Courtesy of AUDI OF AMERICA, LLC

Multi-function button
Catch

-- Turn off the ignition and all electrical consumers and remove the ignition key.