3-Spoke Steering Wheel MULTIFUNCTION Buttons, Removing And Installing, From My 2013: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Install in reverse order of removal, noting the following:

-- Mount the trim, with the multifunction buttons installed, on the steering wheel.

-- Route the connection cable for the tiptronic switch -2- as illustrated.

Fig 1: Be Careful Of Connectors To Tiptronic Switches

Courtesy of AUDI OF AMERICA, LLC

-- Route the rest of the connection cable, including the connector, into the guides inside the steering wheel.

-- Press the trim -2- with the multifunction button onto the steering wheel -1- until it audibly engages.

Fig 2: Loosen Trim With Multifunction Buttons

Courtesy of AUDI OF AMERICA, LLC

-- Make sure the wires are routed correctly in the steering wheel.