Information Electronics Control Module 1 -J794-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the two clips from the Radio Removal Tool T10057 into the slots on the Information Electronics Control Module 1 -J794- until they engage. Points on the grip eyelets of tool face outward.
Fig 1: Insert Two Clips From T10057 Into Slots On Information Electronics Control Module Until They Engage
-- Remove the Information Electronics Control Module 1 -J794- from the installation frame.
-- Remove the Radio Removal Tool T10057 by pushing the locking tabs on Information Electronics Control Module 1 -J794-.
-- Release and disconnect the connectors from the Information Electronics Control Module 1 -J794-.
-- Insert the Fiber-Optic Repair Set - Connector Protective Caps VAS6223/9 -1- onto the MOST bus connector -2-.