LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 511 (Communication (Sedan)) >> 91 Communication >> Antenna Systems >> Antenna Amplifier, Removing And Installing >> Antenna Amplifier 2 -R111-, REMOVING AND INSTALLING, AVANT >> Removing

Antenna Amplifier 2 -R111-, REMOVING AND INSTALLING, AVANT: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the right D-pillar trim panel, refer to Passenger Compartment Trim .

-- Release and disconnect the connectors -1- and -4- from the Antenna Amplifier 2 -R111- -2-.

-- Remove the screw -arrow- and remove the Antenna Amplifier 2 -- -2- from the D-pillar -3-.

Fig 1: Releasing And Disconnecting connectors From Antenna Amplifier
GWWA91-11171Courtesy of AUDI OF AMERICA, LLC