Special Tools

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Front and Rear Door Template VAS038/8

Fig 1: Front and Rear Door Template VAS038/8
Courtesy of AUDI OF AMERICA, LLC
Window Slot Seal Tool VAS219, quantity: 3

Fig 2: Window Slot Seal Tool VAS219
Courtesy of AUDI OF AMERICA, LLC
Gauge - Gap Adjustment 3371

Fig 3: Gauge Set 3371
Courtesy of AUDI OF AMERICA, LLC
The >>min and max<< markings are used to check the lateral adjustment.
The recess in the center of the template is used for checking the height.
The 0.4 mm graduation is used for checking the recess of the front door to the fender, or of the rear door to the front door.
The 0.6 mm graduation is used to check the recess of the trim on the >>B-pillar<< from the rear door to the front door.
Adhesive Strip Remover VAS6349

Fig 4: Adhesive Strip Remover VAS6349
Courtesy of AUDI OF AMERICA, LLC
Pry Lever 80-200

Fig 5: Pry Lever 80-200
Courtesy of AUDI OF AMERICA, LLC
Roller 3356

Fig 6: Application Roller 3356
Courtesy of AUDI OF AMERICA, LLC