Housing, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Press the door outer seal to the side and remove the protective film over the hole -arrow A-.
-- Remove the locking bolt -4- as far as the stop using a screwdriver -1-.
-- Press the housing retaining bracket -3- inward.
-- Remove the housing -2- from the mounting bracket -arrow B-.