Mounting Transmission to Engine
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Audi A4 Quattro, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of AUDI OF AMERICA, LLC
| Item |
Bolt |
Nm |
| 1 1) |
M10 x 50 2) |
65 |
| 2 1)
, 7 |
M12 x 100 3) |
30 + 90° |
| 3 4)
, 6 |
M12 x 75 3) |
30 + 90° |
| 4, 5 4) |
M12 x 120 3) |
15 + 90° |
| 8, 10 |
M10 x 75 3) |
15 + 90° |
| 9 |
M10 x 60 3) |
15 + 90° |
| 11 5) |
M12 x 50 3) |
30 + 90° |
| A |
Alignment sleeves for centering |
- 1)
Also secures the starter.
- 2)
Bolt strength rating 10.9, there is no limit to the number of times steel bolts can be used.
- 3)
The aluminum bolts can be used 2 times.
- 4)
With a bracket for the wires.
- 5)
Installed from the engine side
|
- The aluminum bolts -2 through 11- can be used 2 times. Therefore, the bolts must be marked with two notches X made by a chisel after they have be used the first time -arrow-.
Courtesy of AUDI OF AMERICA, LLC
- Bolts marked with an X cannot be used any further.