Removing And Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Audi A4 Quattro, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

-- Remove the tunnel crossmember. Refer to TUNNEL CROSSMEMBER .

-- Remove the bolts -arrows- and the transmission support with the transmission mount from the transmission.

Fig 1: Transmission Support With Transmission Mount

Courtesy of AUDI OF AMERICA, LLC

Installing

Install in reverse order, paying attention to the following:

Tightening specifications. Refer to TUNNEL CROSSMEMBER, TRANSMISSION MOUNT AND TRANSMISSION SUPPORT OVERVIEW .

-- Install tunnel crossmember. Refer to TUNNEL CROSSMEMBER .