Removing And Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Audi A4 Quattro, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Removing
-- Press the button to the parking brake to lock the electro-mechanical brake.
-- Move the selector lever into S.
-- Pry out the selector lever boot using the trim removal wedge 3409 or a small screwdriver -arrows- and then fold it upward.
-- Release the spring -2- and remove the selector lever transmission range position display unit -Y26- -1- -arrow-.
Fig 2: Releasing Retaining Spring And Removing Selector Lever Transmission Range (TR) Position Display Y26 Upward
-- Disconnect the electrical connector.
Installing
Installation is in reverse order of removal.