Selector Lever Boot, Separating From Handle: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Audi A4 Quattro, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the selector lever handle. Refer to SELECTOR LEVER HANDLE .
-- Bind together the spring tabs -A- on the selector lever handle using a cable tie -B- as illustrated.
-- Slide the sleeve for the selector lever boot -C- over the tabs -arrow-.
-- Remove the cable tie and the sleeve with the selector lever boot from the selector lever.