ATF Pipes: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Audi A4 Quattro, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order, paying attention to the following:
- Tightening specifications, refer to ATF PIPES .
NOTE:
Replace O-rings.
-- Check the ATF level. Refer to ATF, CHECKING LEVEL AND CORRECTING .
-- Install the noise insulation -1- and -2-. Refer to OVERVIEW - NOISE INSULATION .