Selector Lever Cable Overview
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Audi A4 Quattro, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 13 Nm
- For selector lever cable adjustment
- Secured on the shift mechanism function unit
- O-ring
- Replace
- Clip
- For selector lever cable to selector mechanism function unit
- Bolt
- 8 Nm
- Quantity: 2
- Selector Lever Cable Bracket
- Clip
- For connecting the selector lever cable to the selector lever cable bracket
- Selector Lever Cable
- Do not bend
- Refer to SELECTOR LEVER CABLE
- The selector lever cable must be replaced if the rubber grommet is damaged.
- Lightly lubricate ball socket with polycarbamide grease G 052 142 A2 before installing.
- Make sure the rubber grommet on the transmission side is not twisted when installing.
- Refer to SELECTOR LEVER CABLE, ADJUSTING .
- Selector Lever