Outer Window Shaft Strip, Removing And Installing: Notes

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Window Slot Seal Tool T40219, quantity: 3

NOTE:

After removing with the door glass and window regulator still installed, the window shaft strip must be replaced.

It is possible to remove without destroying only when the door glass and window regular are removed.

-- Move the window into the "open" position.

-- The door trim panel is removed. Refer to FRONT DOOR TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the exterior mirror. Refer to EXTERIOR REARVIEW MIRROR, REMOVING AND INSTALLING .

-- Before the window shaft strip -1- can be removed, first disconnect it from the door hooks -arrows- -2-.