Bracket, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Engage the operating cable -3- in the door lock operating lever -2-.
-- Insert the operating cable in the cable bracket -1- and rotate the lever -4- 90° in direction of -arrow-.
- The lever must engage audibly with the locking tab on the cable bracket.
-- Install the door lock cover. Refer to DOOR LOCK COVER, REMOVING AND INSTALLING .
-- Install the inner door panel cover. Refer to DOOR INNER COVER, REMOVING AND INSTALLING .
-- Install the door trim panel. Refer to FRONT DOOR TRIM PANEL, REMOVING AND INSTALLING .
-- Install the exterior door handle. Refer to DOOR HANDLE, REMOVING AND INSTALLING .