Traction Battery -A2- INLET AIR GUIDE, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Installation is carried out in the reverse order while observing the following.
NOTE:
Use a bolt -5- to attach the air guide to the battery cooling module -6- and use bolts -2 and 3- to attach the left -1- and right -4- air guides if the retainers no longer hold or if one of the tabs breaks off.
-- Clip the inlet air guide inside the battery cooling module -6- -arrow B- first, then install the left -1- and right -4- air guides -arrows A-.
-- Install the removed parts in the opposite order