Traction Battery -A2- FRONT OUTLET AIR GUIDE, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Front Outlet Air Guide

Courtesy of AUDI OF AMERICA, LLC

Installation is carried out in the reverse order while observing the following.

NOTE:

Use bolts -2, 3 and 4- to attach the air guide to the battery cooling module -7- if the retainers -6- do not hold any longer or one of the tabs -1 and 5-.

-- Clip the front outlet air guide inside the battery cooling module -7- -arrow B- first, then install the left -1- and right -5- air guides -arrows A-.

-- Electrical connections and routing. Refer to appropriate SYSTEM WIRING DIAGRAM.

-- Reinstall all of the previously removed components.

-- Turn on the ignition.

-- Check the DTC memory for the Climatronic Control Module -J255- A/C display and control head and erase any displayed malfunctions, if necessary using the Vehicle Diagnostic Tester in the "Guided Fault Finding " function.