Footwell Vent Temperature Sensor -G192- /Left Footwell Vent Temperature Sensor -G261-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the driver seat as far back as possible.
-- Turn off the ignition.
-- Remove the storage compartment under the instrument panel on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -A-.
-- Turn the sensor -B- 90° and remove it from the left (driver side) footwell vent.