Wiring Harness Repair Set - Wire Strippers VAS1978/3
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
The Wiring Harness Repair Set - Wire Strippers VAS1978/3 is used for professional stripping and cutting of wires.
The Wiring Harness Repair Set - Wire Strippers VAS1978/3 is a component of the Wiring Harness Repair Set VAS1978B and its previous versions.
Wire stripper has an adjustable stop in its pliers-jaws which can be set to the desired length of wire insulation to be removed.
Stripping
-- Set the slideable stop in pliers-jaws to the desired length dimension to be stripped.
-- Insert wire end from front up to stop into jaws of pliers and squeeze the pliers completely.
-- Open pliers again and remove the stripped wire end.
-- If necessary, cut wires using side-cutter function on the top of the wire stripper.